Self Diagnostic Exit Signs and Emergency Lights
Automatically oversee the function and maintenance of the emergency lighting system. It automatically notifies you of any trouble with the system. When installed, it continuously monitors the system lamps, battery, and charging circuits to make certain they are operating properly.
Each day it momentarily tests the transfer system and the lamp integrity. Once each 30 days it tests the transfer system and lamp integrity for a one minute period. Once every six months it runs a full 30 minute test. This insures that the battery is kept fresh and fully charged for use in an emergency situation.
A push test switch on the unit also allows manual initiation odf a sequence of 1 minute, 5 minute, 30 minute or 60 minute tests. This provides for the ability to program a 90 or 120 minute test.Self diagnostics will also work with your fire alarm system. It can work with a flashing and/or audible sign option.
It is even field programmable to allow a 15 minute delay after normal AC power returns.
Self Diagnostics are available on various Skyline lighting fixtures. Look for this symbol throughout this website or consult the factory for information about specific products.
Self Diagnostic - Features
Exercise battery automatically and prolongs battery life.
Indicates charger malfunction.
Four LEDs continuously indicate the system status.
Audible alarm signals any alarm condition.
Low battery disconnect with lockout feature and brown out protection is standard.
Manual test capability allows you to run annual 90 minute tests easily.
Charging system can charge gel-cell or NiCad batteries and charges in constant voltage or constant current mode as required.
